Now that the walls are up all the joints need to be fared in with joint compound. We have also had a chance to get all of the lights and new fans rewired. You can see the new switch and outlet on the wall in the picture below.
The bead board backing is now put in the closet. The animals didn't like it when I did that because they were using that as a doggy door.
Lastly the new lights in the bathroom and hallway have been installed. The lights in the bathroom look like standard can lights but they are actually fans and lights.
Showing posts with label lighting. Show all posts
Showing posts with label lighting. Show all posts
Tuesday, November 1, 2011
Thursday, August 11, 2011
Kitchen Lights - Above Island
We finished putting up all of the kitchen lights. The center lights had to be shortened to raise them up to the ceiling. Here is a picture of the center lights with the lights on and off.
Here is a picture showing the lights that are in the center of the room as well as the smaller version that are located over sink.
Here is a picture showing the lights that are in the center of the room as well as the smaller version that are located over sink.
Monday, July 11, 2011
Kitchen Lights - Homemade and Installed
As we've posted about before, we were unable to find any suitable lights for the kitchen that weren't really expensive. Even the expensive ones weren't what we wanted, so, we decided to make our own. This seems to be the solution for every problem for us. We ordered lamp parts online and used metal tubing. We got the shades at Rejuvenation - our only "splurge". Because Tyler is a lighting design engineer, he felt confident in wiring and building the fixtures himself. We have older posts that show how he put them together but here they are all up with the ceiling finished around them.
Wednesday, March 9, 2011
Additional Lights for the Kitchen
When we patched up the wall around the windows we wired in for two lights over the sink. We have started to look at the lights that we want to put in and we are liking a pendant style light. Most of the ones that we found that we liked were too expensive so we have been working on making some from some lamp parts. This first pic shows some copper tubing that is used at the top with two washer.
Here I am putting a test one up to see what it is going to look like over the sink.

You can see that the corner of the ceiling holes have to be filled in because it does not get all the way covered with the base piece. This is what it looks like with the light turned on. This was a 60W bulb which is way too much.

With the lower wattage bulb this is what the shade looks like.

We still have to do the work around the top and put the other one up, but this is what it looks like from the distance (with the bulb that is too bright).
Here I am putting a test one up to see what it is going to look like over the sink.

You can see that the corner of the ceiling holes have to be filled in because it does not get all the way covered with the base piece. This is what it looks like with the light turned on. This was a 60W bulb which is way too much.

With the lower wattage bulb this is what the shade looks like.

We still have to do the work around the top and put the other one up, but this is what it looks like from the distance (with the bulb that is too bright).
Subscribe to:
Posts (Atom)