First step was to move the electrical outlet to the new location that is not hidden by the cabinets, you can see the old location on the right where the tan coverplate is.
The floor and the two hidden walls were made of 3/4 finish plywood.
The face frame was built up of poplar with pocket screws. There will be two top drawers and one large door on the bottom with pullout slides.
The front face frame is then coped into the interfacing shape of the sink.
A face frame was created for the front of the sink bottom as well. You can see this leaning against the sink bottom.
The side unit with two panels was constructed and attached to the unit. The next step will be to attach the front frame and build up the drawers and cabinet doors.
No comments:
Post a Comment